X435 fanspeed - SNMP OID

[AntonS]

Hello,

I have another question about X435:

The X435 switch reports incorrect fanspeed in SNMP OID .1.3.6.1.4.1.1916.1.1.1.9.1.4

extremeFanSpeed!@#.iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremeSystem.extremeSystemCommon.extremeFanStatusTable.extremeFanStatusEntry.extremeFanSpeed

I think the rpm is not measurable on X435, so the output of the SNMP OID “extremeFanSpeed” should be 0 or NA?

X435

TST1-SW1.9 # show fans

Slot-1 FanTray information:

State:                  Operational

NumFan:                 1

TST1-SW1.10 #

X440-G2

TST2-X440G2-5.7 # show fans

Slot-1 FanTray information:

State:                  Operational

NumFan:                 4

Fan-1:                  Operational at 2100 RPM

Fan-2:                  Operational at 2160 RPM

Fan-3:                  Operational at 2100 RPM

Fan-4:                  Operational at 2100 RPM

TST2-X440G2-5.8 #

[AntonS]

OK
I will open a GTAC Case

[CThompsonEXOS]

If possible, send me the case number in a message and I will see if I check in on it.

[AntonS]

Hy Chris,

Sorry, it is the 24port version (System Type: X435-24P-4S)

it has a fan, but the rpm is not measurable.

no rpm output in the cli. in snmp the number is huge

BR

Anton

[CThompsonEXOS]

What model is that x435? the 24p should have a fan:

Thanks,

Chris Thompson