X435 fanspeed - SNMP OID
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2022 02:19 AM
Hello,
I have another question about X435:
The X435 switch reports incorrect fanspeed in SNMP OID .1.3.6.1.4.1.1916.1.1.1.9.1.4
extremeFanSpeed!@#.iso.org.dod.internet.private.enterprises.extremenetworks.extremeAgent.extremeSystem.extremeSystemCommon.extremeFanStatusTable.extremeFanStatusEntry.extremeFanSpeed
I think the rpm is not measurable on X435, so the output of the SNMP OID “extremeFanSpeed” should be 0 or NA?
X435
TST1-SW1.9 # show fans
Slot-1 FanTray information:
State: Operational
NumFan: 1
TST1-SW1.10 #
X440-G2
TST2-X440G2-5.7 # show fans
Slot-1 FanTray information:
State: Operational
NumFan: 4
Fan-1: Operational at 2100 RPM
Fan-2: Operational at 2160 RPM
Fan-3: Operational at 2100 RPM
Fan-4: Operational at 2100 RPM
TST2-X440G2-5.8 #
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
10-03-2022 03:47 AM
OK
I will open a GTAC Case
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
10-03-2022 05:56 AM
If possible, send me the case number in a message and I will see if I check in on it.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2022 11:24 PM
Hy Chris,
Sorry, it is the 24port version (System Type: X435-24P-4S)
it has a fan, but the rpm is not measurable.
no rpm output in the cli. in snmp the number is huge
BR
Anton
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
09-28-2022 05:38 AM
What model is that x435? the 24p should have a fan:
Thanks,
Chris Thompson