X450e to 2960S

[Andrew_Schulz1]

I have a X450e that I am linking a Cisco 2960S too. Both ports are in VLAN 99 (management). They are not able to talk to each other and I am not able to access the Cisco switch by the IP assigned to VLAN 99.

Cisco Config

interface GigabitEthernet1/0/22
switchport access vlan 99
spanning-tree portfast

Extreme Config

configure vlan Mgmt99 add ports 1-2, 39-42 untagged

Thanks for any assistance you can provide.

[Zubair_Ahmad]

Hi Andrew,

Since I only saw 1 command under the "Extreme config" I would go ahead and mention that make sure you have "create vlan mgmt99 tag 99" command in there too.

that will specify the "vlan ID". right now the switch looks at the "vlan name" as "mgmt99", tag could be something else...

I ran into it once.

Also make sure you have already taken care of "configure default delete ports all".

[Dorian_Perry]

Hi Andrew,

Is the Cisco mac address being learned for Vlan 99?
EXOS Command: "show fdb vlan mgmt99"

[Patrick_Voss]

Hi Andrew,

Did you configure a IP address on the Extreme side? Where are you trying to ping from?