Log management recomendations
Hello, long time not posting in here, will like to know your recommendations for log management for extreme switches. Thanks
Forum Posts
Resolved! X690 and long distance stacking
Hi community I have found i user guide that for stacking this switch supports 61 and 69 data ports and also that only QSFP28 DACs with lenght up to 5m can be used . Does it mean that stacking for longer distances is not supported ? I would like to ...
Resolved! SSH problems after updating to 30.7.1.11: kex_exchange_identification: read: Connection reset by peer Connection reset by...
After updating a few x440-g2 test switches to version 30.7.1.11 im unable to ssh into the switch a day after booting the new firmware. the error-message i get is:kex_exchange_identification: read: Connection reset by peerConnection reset by 172.28.32...
EXOS | No Vlan assigment on Fabric Attach Proxy
Hi Hub community,I'm having trouble in one of my EXOS stack in the Access layer.Basically, I'm using a Fabric Attach topology - CORE Layer with VSP 8404 as Fabric Server (vIST), ACCESS Layer with x-450 EXOS Stacks as Fabric Proxy. Also, I've Wireless...
Port Scanner shows a wide range of ports blocked which the customer requires to be open for scanning.
No ACL has been configured but a lot of the ports have been scanned and are found to be blocked. See excerpt below.I believe if you dont configure any ACL, all ports should be open by default. Is there any relevant documentation that lists all the po...
