cancel
Showing results for 
Search instead for 
Did you mean: 

X460-G2 connecting 10 meter DAC Cable possible ?

X460-G2 connecting 10 meter DAC Cable possible ?

M_Nees
Contributor III
we want to uplink several X460-G2 switches via 10 meter Copper DAC Cable to a S4.

But it seems not working. Does anybody know if the X460-G2 10Gb optic ports have the needed PHY unit to get 10m Cables runnig ??

Behaviour:
S4 port Link is Up / X460-G2 port stay down - but DAC cable will be recognize correctly.

Switch-1.8 # sh port 52 configuration no-refresh
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
UPL-Core VR-Default E R OFF 10000 FULL 52 SF+_CX10
================================================================================
> indicates Port Display Name truncated past 8 characters

X460G2-48p-10G4 / EXOS 16.1.3.6-patch1-9

3 REPLIES 3

M_Nees
Contributor III
i found an answer in the X460-G2 Datasheet - it is not possibel!

Section: Transceiver Support Matrix

It will only work within a the optional VIM Module!



Yes. Use either max 3m DAC for PHYLESS or go FO SFP+ SR modules.
VIM-2x will definitely support 5m and 10m DAC cable.
GTM-P2G8KFN