ExtremeSwitching (EXOS/Switch Engine) - Page 244 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

Resolved! EXOS - show radius - round trip time

New EXOS V30.2 shows this information: code: RADIUS server : 1 Status is Active host name : IP address : 10.0.1.52 Server IP Port: 1812 Client address: 10.1.0.4 (VR-Default) Retries : 2 * Timeout : 3 * Realm ...

Auto Negotiation after Upgrade to 22.5.1.7-patch1-7

The scenario: We are currently running 21.1.3.7-patch1-7 on our Summit x460-G2 endpoint switches. We use third party 10 Gb SM GBICs which currently are running using auto ON. After upgrading to 22.5.1.7-patch1-7 the port is disabled and there is a m...

Convert QOS from Cisco to Extreme.

Hi - we're converting some Cisco 6509s to your BD8810 switches and I need to know how to set up QOS in EXOS, mainly on the uplinks where congestion may occur. On the Cisco switch, I use 'mls qos' and tweek the output queues a little bit, then I conf...

Mitel UC360 Phone

My Mitel UC360 conference phones are coming up on the wrong VLAN. I have other Mitel handsets, like the 5320, that work just fine. My switching is configured so that the computer VLAN is untagged and the voice VLAN is tagged. This works perfectly fo...

Resolved! Can the X440G2-12t-10GE4 Management port be used as an uplink?

Can the management port on the X440G2-12t-10GE4 be used as an uplink to provide network to the components plugged into the 12 main copper ports? If not, can one of the SFP+ ports be used as the uplink?

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN