Xenpak on port 49 detected, unable to read Oui, possible mdio read error

[Saurabh_Makkar]

Xenpak on port 49 detected, unable to read Oui, possible mdio read error
summitIsXenpak2Operational: port 49 data=ffff

Getting this repetitive error, not able to find any thing on extreme

# sh port 1:49 2:49 3:49 conf no-refresh
Port Configuration
Port Virtual Port Link Auto Speed Duplex Flow Load Media
router State State Neg Cfg Actual Cfg Actual Cntrl Master Pri Red
================================================================================
Non_live>VR-Default E R OFF 10000 FULL NONE
2:49 VR-Default E NP OFF 10000 FULL NONE
BLR_IMS_>VR-Default E A OFF 10000 10000 FULL FULL NONE SF+_LR
================================================================================

[OscarK]

I think this is a problem with the XENPAK where the switch cannot read some data from it. Replace the XENPAK.

[BrandonC]

The logs are indicating an issue with the XENPAK. I would suggest replacing the XENPAK with a known working one.

[Saurabh_Makkar]

How can i check via CLI ?

[Saurabh_Makkar]

As per my understanding , it looks like issue in 2:49, but the port is down (though in enable state)