ExtremeSwitching (EXOS/Switch Engine) - Page 361 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

MTBF values of VDX 6740, VDX 6940 24Q/36Q/144S, VDX 8770-4/8,SLX 9850-4/8, 2740GbE Line card of 8770-4,6040GbE Line card of 9850 switch?

MTBF values of VDX 6740, VDX 6940 24Q/36Q/144S, VDX 8770-4/8,SLX 9850-4/8, 27*40GbE Line card of 8770-4,60*40GbE Line card of 9850 switch?

24 port 1g copper & 4 port 10g copper

Which extreme switch model is match for 24 port 1g copper & 4 port 10g copper. or else what is an other option for this requirements?

Can I configure the switch to allow specific packets with FCS errors to pass through

We are using a Summit X460-48t Network Switch between a Linux box and some custom HW. For testing purposes I would like to send some packets with a known, corrupted FCS and see the response on the custom HW. Is there a way to configure the switch t...

MLT on Exos to work with Avaya MLT/SMLT

Hello All, How do I setup LACP/LAG on EXOS G450G2 to work with SMLT on Avaya VSP/Switches? I know LACP, but I thought that MLT/SMLT is a specific type of LACP. I have two VSPs with SMLT to an EXOS X450G2 switch, how do I create an MLT on the EXOS s...

Simple device detection and policy application - straight EXOS

Good morning. I've not done a lot of policy work in EXOS except for some basic ACL's. I'm wondering if anyone has samples or guidance around detecting device types (like access points, thin clients, phones or pc"s) and automatically configuring switc...

Top Kudoed Authors

User

Count

28

26

20

20

17

GTM-P2G8KFN