We are trying to execute in SNMP to get realtime CRC errors via snmp walkI found the oid with details with this linkhttps://extremeportal.force.com/ExtrArticleDetail?an=000087900but when we are trying to execute snmpwalk, we are getting this result, ...
Port stats not coming
Im facing some strange issue in Extreme Switch 15.6.4.2 (X460-48t)
For 1st 24 ports stats are coming for next 24 ports its not coming
sh port stat no-refresh
Port Link Tx Pkt ...
Xenpak on port 49 detected, unable to read Oui, possible mdio read error
summitIsXenpak2Operational: port 49 data=ffff
Getting this repetitive error, not able to find any thing on extreme
# sh port 1:49 2:49 3:49 conf no-refresh
Port Configura...
We have extreme inter switch with 7 ports in LAG all in different slots.
And we can see 1 of the 7 ports is taking high utilization apart from other 6
As these on different slots, so any input on the issue.
If anything can be checked...
1 port in LACP TX utilization is reaching 100%, average traffic on both these ports are 17% average.
MPGWLCTC> A 1000 4.09 100.00 8.05 100.00 --> 1:48
MPGWLCTC> A 1000 8.72 8.72 7.95 ...
rmon is already enabled the o/p is also correct
Just the decoding of o/p was a challenge here, now i decoded it
Thanks
Here is the decoding
the result shown in SNMP walk from nms tool is correct however the decoding of the o/p is little t...
Hello Mrxlazuardin.
I've applied, but it comes in fraction of seconds so its difficult to check.
Lets see if things change after applying L3_L4
Thank you
regard
Saurabh
