Configuration of static dhcp binding on d-serie Switch don ́t work

[info_systemhaus]

i Need to config some dhcp Clients on my D2G124-12P with a different Gateway ... all Clients are in the same subnet .

Following Config don´t work :

set dhcp enable
set dhcp exclude 192.168.46.2 192.168.46.10
set dhcp exclude 192.168.46.199 192.168.46.254

set dhcp pool kolbe
set dhcp pool kolbe lease 0 12 0
set dhcp pool kolbe dns-server 192.168.46.254 8.8.8.8
set dhcp pool kolbe default-router 192.168.46.254
set dhcp pool kolbe network 192.168.46.0 255.255.255.0
set dhcp pool kolbe option 78 hex 01c0.a82e.03

set dhcp pool ap-gs10
set dhcp pool ap-gs10 dns-server 192.168.46.2
set dhcp pool ap-gs10 default-router 192.168.46.2
set dhcp pool ap-gs10 hardware-address 50:26:90:18:ed:1e
set dhcp pool ap-gs10 host 192.168.46.195 255.255.255.0

I tried this of course already with "dhcp pool client iedentifier" Option ..
i tried this with the dhcp hardware-adress Option

.. but nothig works, the Client everytime gets an address from pool "Kolbe"
the Standard pool. It´s not possible to work with a static dhcp entry.

Of course i tried different devices .. with wireless and wired Interfaces .. nothing works.

is anybody here who has successful config a D-Series Switch with such static dhcp bindings ?

Chassis Serial Number: 13260009905Y
Chassis Firmware Revision: 06.03.13.0001



Thanks



Christian

[info_systemhaus]

.. i think this article follow our communication.. because yesterday i put my question into a GTAC Case

and the(n) tech guys discovered the fact ... that all Switches are affected ..

this bug should get my name 

[Ronald_Dvorak]

Article ID: 10424 was released today, exactly the problem that you've reported, the only thing that is missing in the article is that also the D2 is affected as we'd see in our tests...

Ron

https://community.enterasys.com/enterasys/topics/securestack_dhcp_server_fails_to_reserve_ip_address...

[info_systemhaus]

Hello Ronald,

thanks for your reply ...

this System is located on a cutomer site as a WLAN Demo System .... thats why i need 3 or 4 days to test your suggestion .. but i will reply

I've tried only the static part of the configuration and it looks like that the command "set dhcp pool XXX hardware-address" isn't working.

I´m reasssued about this .. it was not my lack of knowledge to configure such a easy command like a dhcp binding ....




Regards

Chris

[Tamera_Rousseau]

Looking forward to seeing the results of your test Chris!