Hello, i wanted to know if there a limitation on SPT mode’s when i connect tunnels via ISIS to extend VLAN’s, i wanted to change the actual Spanning Tree MSTP to RSTP. Thanks!, Joan Ale
Hi. Does anyone have standards/config for a VSP cluster connection to 3rd party switch cluster with LACP? The 3rd party will be HP/Aruba or Dell switches. I see some loops when 1 of the 3rd party switches are rebooted. Any ideas perhaps? Thx.
Can some one share the sample command output of show running-config verbose for Avaya ERS and Avaya VSP switches. I am a freelancer researcher so would like to know more about the device configuration
Can someone explain me the difference between the OS used for the VSP and ERS series switches. Are both the devices using same ? Name of the OS used bu the VSP and ERS switches ? EOS/EOL for the operating system used by the above devices ? Any vendor...
Hi, we have 4 VSP 7254XSQ connected ISIS -SPBM. Only one VSP is well synchronized with the time . The others have an offset. And one VSP, NTP is not active. My question is simple. Is there an impact if all 4 VSPs are not up to date with the time? If ...
