I want to know the need minimum ampere of vsp7254 xsq 460W(220V)
I want to know the need minimum ampere of vsp7254 xsq 460W(220V)
Forum Posts
Root interface manually election
Hello, i’m looking for loop prevention by set priority spanning tree on interfaces to connect to switch core but it not working. i set the following on interface but the root port still on other way when i put “show spanning rstp status”. interfac...
ECMP on VOSS in GNS3: CPU 100%
Hi all, I’m doing some ECMP test in GNS3 using VSP’s (v8.1.0.0 image). Setup: The Cisco is advertising 192.168.1.1/32 via OSPF to VSP1 and VSP2. VSP1 and VSP2 redistribute OSPF into ISIS using a route-map wich sets the metric to 5000, so I can ...
Resolved! AVAYA VSP4450 +ONA SPBM Spanning Tree mode
Hello, i wanted to know if there a limitation on SPT mode’s when i connect tunnels via ISIS to extend VLAN’s, i wanted to change the actual Spanning Tree MSTP to RSTP. Thanks!, Joan Ale
VSP Switch Clustering with 3rd Party Switches
Hi. Does anyone have standards/config for a VSP cluster connection to 3rd party switch cluster with LACP? The 3rd party will be HP/Aruba or Dell switches. I see some loops when 1 of the 3rd party switches are rebooted. Any ideas perhaps? Thx.
