ExtremeSwitching (VSP/Fabric Engine) - Page 105 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

IGMP static join on ERS platforms?

Hi All, I need to do a static IGMP join on an ERS, I need to set a specific set of ports to subscribe to PTP (224.0.1.129). But can't find the command, or if its even possible? I know this is possible on a VSP & I've done it on Arista EOS & Cisco ...

ERS 4526t-PWR QoS support

Does the ERS 4526t-PWR switches support "traffic-profiles"? Example: qos traffic-profile classifier name xxx protocol 6 src-port-min 5060 src-port-max 5061 update-dscp 26 update-1p 3 block xxx Looking to differentiate and classify voice and data t...

Vsp, exos and juniper between stp protocol

I am new to network. Which stp protocols we select and why? vsp 4450 is backbone, x460 and juniper ex3400 edge. rstp or mstp and why? also backbone and edge switches how to configure separately

Nutanix Server Hardware - integration with extreme VSP's

Hi, We are currently investigating options in deploying Nutanix Server hardware between 2 x Data Centers (over fabric connect) that will be terminating on VSP7200's ToR switches.. Has anybody experience of using Nutanix hardware on extreme VSP's in...

poe disable on the 4950

hi when I run a Power-Cycle test I have Test 301 POE Contact - FAILED POE Bad PSE I2C Adrs [0]: FFFFFFFF FFFFFFFF FFFFFFFF i have updated the poe / harward / software... nothing works If you have an idea best regards

Top Kudoed Authors

User

Count

34

18

18

18

8

GTM-P2G8KFN