ExtremeSwitching (VSP/Fabric Engine) - Page 130 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Can you downgrade a ERS4850 on version 6.1 to 4.2.3 ?

We have an RMA switch that has arrived with 6.1 and we need to downgrade to install in stack of VSP4850 ERS4850's with 4.2.3 software. Can you downgrade this switch ? Or do we need to downgrade - will the V6.1 switch integrate in the 4.2.3 stack ? ...

vsp 7254xsq 1000base-x fiber links, autonegotiation and Remote Fault Indication RFI

From the v6.1 VSP 7200 document, NN47227-301_11_03_InstallingTransceiversOpticalComponents_VOSS.pdf : If you use 1 Gbps fiber SFP transceivers, auto-negotiation is always disabled so the remote end must also have auto-negotiation disabled. Otherwis...

How to define Native Vlan to trunk port on voss VSP switches

Define Native Vlan on Voss

Are ERS3600 and VSP7200 Switches "Common Criteria" ready? (CC Version 3.1)

Are ERS3600 and VSP7200 Switches "Common Criteria" ready? (CC Version 3.1)

Is it possible to get multiple is-is adjacencies on a same port with VOSS7 on VSP 7200 series switches ?

This question because we use an operator's L2 VPN tunnels to interconnect our VSP on different remote sites. Instead of using a different tunnel for each adjacencie, it would be easier that switches could see each other via same L2 tunnel, forming so...

Top Kudoed Authors

User

Count

40

26

23

18

10

GTM-P2G8KFN