Hi budies,Using auto-sense for months now, I'm asking now why auto-sense wifi i-sid is not yet implemented for whos don't have pleasure of operating Fabric Attach powered AP. Using LLDP TLV type 7 WLAN system capability sent by neighbor AP could be v...
Hello, I have an ERS 4950 (Ports 1/49-50) connected to a VSP-7254 VOSS Switch (Ports Gig1/17-1/18) using fabric attach. Everything works fine but I was just wondering if this is correct as on the ERS side when I run "show fa elements" I'm seeing the...
Hello All,I've had a look at the various Extreme documents regarding LACP on a LAG etc. I can't seem to make this work for some reason.What I have is 2x 8404C 10GB core switches and I wish to use ports 2/23 and 2/24 as a LAG with LACP.I've tried fro...
hello,I want to upgrade some Fabric Engine switches, but I don't want them to restart at the same time. So, when I do upgrade software from XIQ-SE, I put at the device group number as 1, and the download is done one by one, but then the restart is do...
Hi, I've made a quick lab on GNS3 version 2.2.42 and VOSS image 8.10.1.0 GA and made a simple SMLT\vIST configuration between a pair of switches But the vIST remain UP only few minutes and then goes down.Below the screenshot of the console of the two...
