ExtremeSwitching (VSP/Fabric Engine) - Page 19 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Routing between two vlans not working for the same client MAC address

Hi team,I am running into this issue while studying the VOSS in the EVE-NG environment. I am using this virtual 5520 running on 8.10.1.0 VOSS. I have a Cisco router connected to its Gi 1/1 interface to simulate client traffic. The Gi 1/1 is configure...

Resolved! MEMBER PORTS NOT SHOWING IN MLT LACP CONFIG

Dear Community,I am trying to configure lacp with smlt but the member ports and vlans are not showing up in the "show mlt" . The vlan 10 is added under flex enabled interface G1/1.what am I missing in my configuration below?## PORT CONFIGURATION - P...

BGP+

Hi,I'm trying to setup BGP v6 announces through BGP v4 peering between two VOSS devices. User guide talk about BGP+ functionnality but I can't achieve my goal.Has someone already tried that and has a more comprehensible example to share than this one...

Resolved! Re-enable poe

Hello,I'm quite lost (new to VOSS). I disabled POE on a port by "poe poe-shutdown port 1/11" but how do I re-enable it?? No.... doesn't work in this case.Pls help! __Leo

How to clear a user device mac address entry in the Fabric Connect table

I hope my question makes sense. I am building a lab to learn the Fabric Connect technology. The connectivity is working between two hosts. On the BEB, I see the client's MAC address with this command:r1:1#show vlan mac-address-entry mac 50:00:00:0e:0...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN