ExtremeSwitching (VSP/Fabric Engine) - Page 21 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Removing default SNMPv3 configuration on VOSS 9.x

Hi all,I am attemping to set up some new 5420M switches with VOSS 9.0.0.2 on them. We are using SNMPv3 settings on them and I am attempting to remove the default settings including the SNMPv1/2 settings and the default SNMPv3 intitial user and group....

Resolved! Wifi I-SID through auto-sense

Hi budies,Using auto-sense for months now, I'm asking now why auto-sense wifi i-sid is not yet implemented for whos don't have pleasure of operating Fabric Attach powered AP. Using LLDP TLV type 7 WLAN system capability sent by neighbor AP could be v...

Resolved! FA from VSP 7254 to ERS 4950 displaying individual ports

Hello, I have an ERS 4950 (Ports 1/49-50) connected to a VSP-7254 VOSS Switch (Ports Gig1/17-1/18) using fabric attach. Everything works fine but I was just wondering if this is correct as on the ERS side when I run "show fa elements" I'm seeing the...

Resolved! Creating a LAG/MLT and LACP on 2 Extreme 8404C core ports

Hello All,I've had a look at the various Extreme documents regarding LACP on a LAG etc. I can't seem to make this work for some reason.What I have is 2x 8404C 10GB core switches and I wish to use ports 2/23 and 2/24 as a LAG with LACP.I've tried fro...

Bulk Fabric Engine Software Upgrade

hello,I want to upgrade some Fabric Engine switches, but I don't want them to restart at the same time. So, when I do upgrade software from XIQ-SE, I put at the device group number as 1, and the download is done one by one, but then the restart is do...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN