ExtremeSwitching (VSP/Fabric Engine) - Page 38 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

DHCP Fwd-Path to Broadcast IP not working but unicast does

Hello,Moved the VLAN IP to a new Fabric Engine with 8.5.2 and DHCP Fwd-Path to a Broadcast IP does not work, it works fine on a VSP 4850 with 6.1.3.0. If change the address to the unicast IP of a DHCP Server in the Server subnet (which is on another...

Network Latency and Link Aggregation Group Size of Universal Switches

Hi all,Anyone knows the Network Latency and Link Aggregation Group Size of 5520 and 5320 respectively?Thank you.

Interoperability between VSP - Cisco, MSTP-PVST+

Hi Team,Is there any doc or lab about integration of this stp topology? I only found and old document from Avaya ERS600 IST from April 2010, doc number NN48500-588, with no much detail about it. It would be useful found one with VSP/SPB.Thanks!!!

Ping with 'do not fragment' on VSP 7400?

Hi,I need to verify the MTU on a service provider circuit which is connecting two VSP 7400s.I am getting successful pings despite setting a 'datasize' that I know is too high, so it seems that the packets are being fragmented. There does not appear t...

How to enable STP BPDU filter under trunk interface in VOSS

Hello,Anyone can help on how to enable BPDU filter under a trunk port on VSP 7400 ? I couldn't find it in any document.this trunk interface is temporarily connected to a Cisco switch for migration to fabric connect setup, however, on Extreme VSPs I'm...

Top Kudoed Authors

User

Count

34

18

18

18

8

GTM-P2G8KFN