ExtremeSwitching (VSP/Fabric Engine) - Page 50 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

VSP4450 web interface not authenticating

Hi.I am getting “Authentication failed” trying to HTTPS to a 4450.Even after successful “Smelter_VSP4450:1(config)#web-server password rwa RW xxxxxxxxxx”Any advice please?Smelter_VSP4450:1(config)#show web-serverWeb Server Info : Status ...

VSP and ACL's (and some XMC)

First time poster. A few questions, but related. All VSP's are running VOSS 8.4.3.01. I'm trying to limit access to the some ERS switch IP addresses using ACL's. The switches IP addresses are in a VLan. So far, I have IP's of permitted users (network...

how to configure radius authentication for switch management access on voss

Hi. We are struggling to configure radius authentication on our new VSP Fabric switches. We have successfully managed to get this to work on ERS switches but not VSP/Fabric Switches. FYI. The switch in question is a 5520 running 8.5.1 software....

VSP same platform VLAN ID's, but different subnets, on same cluster?

Hi,So here is the problem I am trying to solve.Have a cluster pair in location A and another cluster pair in location B. These are being replaced by VSP's and fabric. Each location has a local VLAN 10, but different subnets, say: Location A VLAN 10 =...

Resolved! VSP switch lab - convert 4850 to VSP?

Hi allI am trying to build a lab to understand VOSS as my current employer has it in their DC, it's a massive blind spot for me and the GNS3 image isn't fully featuredIt is very hard to find VSPs for cheap on ebay etc - is it possible to buy some ERS...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN