ExtremeSwitching (VSP/Fabric Engine) - Page 56 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

What are the caveats for invlan ACLs in GNS3

I was mocking up some invlan acls for a customer and they did not appear to work in GNS3. Is that just the lack of data plan support (I thought I was accounting for that) or is there some greater limitation specific to invlan ACLs? To clarify, I a...

QoS tag VLAN or Port

Hi,I have a VSP4450 with a connected IPTV server. We have problem with TVs lagging and I would like to add a QoS tag either on the ingress traffic on the port or on the VLAN (52) to see if it resolves the issue?Is it this easy or am I missing somethi...

Trying to create a simple access port untagged vlan and trunk port tagged.

I am just messing with VOSS switches for the first time, I am using GNS3 to test different configurations. I have been stuck trying to do something as simple as passing a vlan down through the network(VMfortigate -> VM-VOSS) to a windows machine. I a...

Resolved! VSP route tracking

Hi team,I would like to know if VSP can track a route and take decisions depends of its state by it self or using XIQ workflows.For example track the reachibility of a host and if it fails take another route even the first used route works.RegardsEF

VOSS LLDP-MED with Mitel Phone

Trying to get this to work, but no luck so far. I have 2 separate VLANs for data and voice. On the VSP port, the data VLAN is default and untagged. I have also configured 2 commands for LLDP-MED to get the Mitel onto the voice VLAN. However, the phon...

Top Kudoed Authors

User

Count

33

18

18

17

7

GTM-P2G8KFN