Extreme Networks

Jon_P · 10-27-2023

Hi,I would like to configure 2 VRFs on a VOSS / Fabric Engine device running 8.10.2.We need to configure the same VLAN numbers in each VRF, ie both will have separate instances of VLANs 10, 11 & 12.Is this possible? If yes, how can I configure it, as...

Jon_P · 09-21-2023

Hi,We are in the process of replacing a number of S-Series routers with 5520s running FE.We have previously replaced our datacentre core routers with VSPs using SPBM. As our network was exclusively using OSPF before this, the core VSPs ended up runni...

Jon_P · 06-13-2023

Hi,Is there any actual difference between the following commands:vlan members 1234 1/20vlan members add 1234 1/20 Leaving out add doesn't seem to result is any other VLANs being removed from the port, or any other ports being removed from the VLAN, s...

Jon_P · 03-23-2023

Hi,I need to verify the MTU on a service provider circuit which is connecting two VSP 7400s.I am getting successful pings despite setting a 'datasize' that I know is too high, so it seems that the packets are being fragmented. There does not appear t...

Jon_P · 11-11-2022

We have just upgraded from an older version of EMC to XIQ Site Engine. I know the old version was predominantly white, but it has gone to another level and is frankly hurting my eyes.Wearing sunglasses in the office makes the director think I'm hung-...

Jon_P · 06-15-2023

I posted in the VSP/Fabric engine section - does the behaviour you describe happen on that OS?

Jon_P · 11-08-2022

Thanks for the reply.In this case the VLANs exist on the switches and are just being applied to ports dynamically.

Jon_P · 09-27-2022

I'm also seeing this in the S-Series logs:<164>Sep 26 20:23:16 0.0.0.0 RtrArpProc[5]Received ARP response for 10.10.152.1 which is an IP address locally configured on vlan.0.1960. The ARP was received on tg.5.16 from L2 MAC: 88-7e-25-be-75-0d using L...

Jon_P · 01-13-2022

Thanks for pointing me in the right direction. I was finally able to find the right object in our SNMP software's MIB browser by drilling down to experimental/isisMIB/isisObjects/isisCounters/isisCircuitCountertable/isisCicNumAdj

Jon_P · 01-10-2022

To expand on this slightly, we're currently monitoring these VSPs with both Statseeker & Castlerock SNMPc, and we also have Extreme Management Center. Ideally we'd like the ISIS logical interface to be visible as an SNMP object, but any way of creati...

Extreme Networks

User Statistics

User Activity

Can the same VLAN ID be configured in multiple VRFs in VOSS?

IS-IS between Fabric Engine devices and EOS (S-Series)

Does the 'add' option actually do anything in 'vlan members add'?

Ping with 'do not fragment' on VSP 7400?

Feature Request - Dark mode

Re: Does the 'add' option actually do anything in 'vlan members add'?

Re: DHCP snooping on ports with dynamically assigned VLAN

Re: S-Series advertising local MAC address for VRRP interface

RE: SNMP monitoring of Fabric Extend tunnel

RE: SNMP monitoring of Fabric Extend tunnel