Hello all, I am not very familiar with VSP. I do need some help on something that could be simple. what is vlan identifier when creating new vlan? It is same as vid in ERS?I don’t know how to give weight for default static route when I configure a de...
Dear all, We are planning to deploy a VSP 7200 switch and this switch will be connected to a Cisco gateway router. This VSP switch will have multiple subnets/vlans and it will also be connected to multiple access level switches. I literally have two ...
I want to know the need minimum ampere of vsp7254 xsq 460W(220V)
Hello, i’m looking for loop prevention by set priority spanning tree on interfaces to connect to switch core but it not working. i set the following on interface but the root port still on other way when i put “show spanning rstp status”. interfac...
Hi all, I’m doing some ECMP test in GNS3 using VSP’s (v8.1.0.0 image). Setup: The Cisco is advertising 192.168.1.1/32 via OSPF to VSP1 and VSP2. VSP1 and VSP2 redistribute OSPF into ISIS using a route-map wich sets the metric to 5000, so I can ...
