Extreme Networks

David_Nelson · 09-27-2023

Hello,I have EIQ deployments with a mix of AP510c's and AP305c's in a K12 environments. Most locations have cafeterias, auditoriums and gymnasium that would benefit from enabling client load balancing on the AP's in those spaces.The documentation to ...

David_Nelson · 01-14-2021

Hi All,I have a few X450 G2 switches already in production as IDF switches with sharing groups configured for the up-links back to the core MLAG pair. Now I need to get these IDF switches on-boarded for management in XIQ. It does not appear there is ...

David_Nelson · 12-01-2020

Hi All,I am setting up a pair of EXOS switches as MLAG peers to provide redundant connectivity to stacked switches in our IDF closets. I have been referencing the EXOS User Guide along with some other GTAC articles. In one titled, “Key Design Points ...

David_Nelson · 11-25-2020

I have have an X590-24x-1q-2c that was previously in a stack but is now in production as a stand-alone switch. I would like to use the QSFP28 ports on the switch but they appear to be reserved for stacking. I believe the solution is to run disable st...

David_Nelson · 11-12-2020

I am upgrading wireless for a site where one SSID is configured to allow AD joined computers to connect automatically using certificate based 802.1x authentication. This has been working great and they are happy with the setup, so I am not dead set o...

David_Nelson · 09-27-2023

Now that I went ahead and configured client load balancing I see in the interface it says it will load balances to neighboring AP's that have load balancing enabled... or something to that effect. Anyhow it looks like this should work.. and with a fe...

David_Nelson · 03-10-2021

I am having the same problem but with EXOS 30.7.1.1 patch 1-54 installed. SSH was working when I setup the switch but ssh stopped working after a reboot… and no rebooting again did not fix it. Would appreciate anything we can try, otherwise will open...

David_Nelson · 01-20-2021

Yeah.. I would not have pulled the trigger on that myself if I hadn’t had a guy onsite to give me a serial connection if I needed it. I do see another possible option, if you are in the web interface look under the “Apps” menu. In 30.6 at least there...

David_Nelson · 01-19-2021

Yes you can. I did this just today only on EXOS 30.6.x.x You have to go into quick setup wizard interface. Just leave the stuff you don't want changed blank.

David_Nelson · 11-27-2020

There is a “free” on available from SolarWinds that I have used for the past few years and have been very happy with. They do make you give your contact info to download, but I have not found them to pesty and I am half interested in their products s...

Extreme Networks

User Statistics

User Activity

Multiple client load balancing areas in one building?

XIQ Supplemental CLI for EXOS Sharing Group Uplink Config

Important to MLAG using all unique ethernet port numbers on each MLAG peer switch?

Will "disable stacking-support" reset my switch to defaults?

802.1x Certificate Auth vs. AD Computer Auth from a security standpoint?

Re: Multiple client load balancing areas in one building?

Re: SSH host key generation failed on X440G2 EXOS 31.1.1.3-patch1-1

Re: Enable Telnet via WebUI

Re: Enable Telnet via WebUI

Re: What tftp application do you recommend?