ExtremeSwitching (VSP/Fabric Engine) - Page 89 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

VSP Switch Clustering with 3rd Party Switches

Hi. Does anyone have standards/config for a VSP cluster connection to 3rd party switch cluster with LACP? The 3rd party will be HP/Aruba or Dell switches. I see some loops when 1 of the 3rd party switches are rebooted. Any ideas perhaps? Thx.

Resolved! Require Command output

Can some one share the sample command output of show running-config verbose for Avaya ERS and Avaya VSP switches. I am a freelancer researcher so would like to know more about the device configuration

Resolved! OS details

Can someone explain me the difference between the OS used for the VSP and ERS series switches. Are both the devices using same ? Name of the OS used bu the VSP and ERS switches ? EOS/EOL for the operating system used by the above devices ? Any vendor...

VSP 7254XSQ connected ISIS SPBM : change clock time impact ?

Hi, we have 4 VSP 7254XSQ connected ISIS -SPBM. Only one VSP is well synchronized with the time . The others have an offset. And one VSP, NTP is not active. My question is simple. Is there an impact if all 4 VSPs are not up to date with the time? If ...

SPBM-Cloud Packet loss: how to debug, possible causes?

i have reoccuring packet loss of 20s-2m and need some help debugging. we are using the following components and configuration: 4x VSP 8600 Version 6.3.3.0 200x Summit x440G2 Version 30.5.1.15 The VSP are configured in an spbm cloud. Two VSPs per loca...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN