Mgmt CLIP

[Francisco_Aguil]

We recently installed some VSP8600 in version 8.10.0.0, however we are not able to manage the SW via SNMP or SSH, the workaround of the "MGMT-CLIP" that we have used in 7400 does not work, any advice?

[EXTR_Paul]

I would confirm what code versions you working with.  There was no v8.10 for the VSP8600.   Right now its at 8.1.X.

But I think I know your issue.

The VSP8600 operates a different VOSS code stream than the other VSP/VOSS/FabricEngine switches. VSP4K, VSP7K, VSP8200/8400. 

And the VSP8600 code does not have feature parity with the VOSS/FabricEngine code.

The VSP8600 does not support Segmented Management.   The Segmented Management feature is only available in VOSS/FabricEngine 8.2 and above.  

To manage your VSP8600 you only need to IP reachability to any IP interface in the GRT.   So that would be any CLIP or In-band IP. 

If you can ping an IP interface just make sure your boot flags didn't change.

conf t

Boot config Flag ?    Then make sure all your ssh, snmp and https is turned on.