cancel
Showing results for 
Search instead for 
Did you mean: 

VOSS 8.2: Starting pre-installed TPVM console

VOSS 8.2: Starting pre-installed TPVM console

M_Nees
Contributor III

i start the pre-installed tpvm system on a VSP7400 (VOSS 8.2).

Accessing to console request a password change …

i do not know the current predefined admin password of this vendor pre-installed vm.

virtual-service tpvm console


===============================================================
Admin Password Configuration
===============================================================
You must change the admin user password.
===============================================================

Changing password for admin.
(current) UNIX password:

passwd: Authentication token manipulation error
passwd: password unchanged

Does anybody knows ? Or how can i end-up this dialog ?

 

BR

1 ACCEPTED SOLUTION

MatzeKS
New Contributor III
2 REPLIES 2

M_Nees
Contributor III

Thanks.

 

etype new UNIX password:
passwd: password updated successfully
[ OK ] Started Admin Password Update Service.
[ OK ] Reached target Network (Pre).
[ OK ] Started ifup for eth0.
Starting Login Service...
Starting Raise network interfaces...
[ OK ] Started Login Service.
1 2020-10-23T13:36:03.241Z SW-EAST CP1 - 0x0000c5e7 - 00300001.320 DYNAMIC SET GlobalRouter HW INFO Link Down(1/s1)
1 2020-10-23T13:36:03.662Z SW-EAST CP1 - 0x0000c5ec - 00300001.320 DYNAMIC CLEAR GlobalRouter HW INFO Link Up(1/s1)
[

 

MatzeKS
New Contributor III

admin / password

GTM-P2G8KFN