We have a site with a VSP 5420F-24P-4XE. This is a parking garage and they're adding some cameras. They're reporting that once they reach more than 11 cameras, plugging in any additional will cause a different switch to lose power. I started a trace,...
Hello community, do you have an experience with implementing such use case?The requirement is simple, change CAK key on port/profile without interruption of the traffic. Competition calls this feature "MACsec Using Pre-shared Key Hitless Rollover Key...
Hi,Investigating an issue where some packet loss is happening within the local network.Looking into where packets maybe being dropped there is a continual high in discard count on a L3 interface between a VSP and S8. In fact, it is happing on L2 conn...
Hello at all,I try to establish a SMLT connection with LACP.I do have two VSP-7400-48Y-8C VSPs and one Cisco UCS C240 server with 6 network interfaces (4 x 25GBit SFPs and 2x 10GBit RJ45 Ports).On the server side I created a bond with one of the 25GB...
Just a quick reminder that if you are looking for workflows and automation scripts to help deploy VSP edge, these are all posted under Extreme Networks Github pages; these links.XIQ-SE Workflows: https://github.com/extremenetworks/ExtremeScripting/tr...
