VSP Edge automation workflows for use with XMC/XIQ-SE

[Ludovico_Steven]

Just a quick reminder that if you are looking for workflows and automation scripts to help deploy VSP edge, these are all posted under Extreme Networks Github pages; these links.
XIQ-SE Workflows: https://github.com/extremenetworks/ExtremeScripting/tree/master/XMC_XIQ-SE/oneview_workflows
XIQ-SE Scripts: https://github.com/extremenetworks/ExtremeScripting/tree/master/XMC_XIQ-SE/oneview_CLI_scripts

[Jave]

Hi Ludovico,

Thanks for all stuff, it's very useful. I would have a question about to the two workflows I've tested for deploying my Fabric at edge, "Onboard VSP" and "Onboard Mgmt VLAN". Normal approach for me is to change Mgmt VLAN first, then Onboard VSP. But I use auto-sense isis authentication to secure access to the Fabric, and in this case, changing mgmt vlan 4048 to an another one will failed because adjacencies are not yet up and new mgmt vlan is not reachable.

Are you agree with my reasonnment ? Is modifiying "Onboard Mgmt VLAN" for integrating isis authentication mecanism the only solution ?

Regards.

[bar]

Hi thanks for these links Ludovico Stevens , there is a workflow there that we have deployed (Create Device Groups from Sites)
We would also like to deploy: "Assign Device to User Device Group based on site"  but it does not seem to be available.

can anyone offer a working link.

thanks.

[Zdeněk_Pala]

The broken link was fixed. Thank you for reporting it!

------------------------------
Regards

Zdeněk Pala
------------------------------

[bar]

Thanks for the fixed link Zdeněk Pala.

Newby question:  how do I find the XiQ API username and password?

thanks,