AD authentication V2110 8021x failed
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-24-2019 12:27 PM
I've create a rule in EAC so that AD laptops can authenticate to wireless and can connect to the infrastructure.
The conditins of the rule are:
Authentication method is 802.1x (PEAP)
The end system group is defined as:
objectCategory CN=Computer,CN=Schema,CN=Configuration,DC=comp,DC=local
And the location group is the SSID.
The authentication fauls and the error is a CLient Certificate Error.
What is wrong in the config ?
The conditins of the rule are:
Authentication method is 802.1x (PEAP)
The end system group is defined as:
objectCategory CN=Computer,CN=Schema,CN=Configuration,DC=comp,DC=local
And the location group is the SSID.
The authentication fauls and the error is a CLient Certificate Error.
What is wrong in the config ?
Johan Hendrik
System Architect
Audax
2 REPLIES 2
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-28-2019 07:47 AM
Thanks, I will look into it
Johan Hendrik
System Architect
Audax
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-25-2019 09:39 PM
Hello,
The EAC appliance is deployed with a self signed RADIUS certificate that's not trusted by clients.
The supplicant on the Windows Client needs to not validate the certificate or a certificate signed by a trusted authority needs to be installed.
https://gtacknowledge.extremenetworks.com/articles/Solution/802-1x-User-PEAP-User-Rejected-in-NAC
Thanks
-Ryan
The EAC appliance is deployed with a self signed RADIUS certificate that's not trusted by clients.
The supplicant on the Windows Client needs to not validate the certificate or a certificate signed by a trusted authority needs to be installed.
https://gtacknowledge.extremenetworks.com/articles/Solution/802-1x-User-PEAP-User-Rejected-in-NAC
Thanks
-Ryan
