cancel
Showing results for 
Search instead for 
Did you mean: 

AP305C 10.3.r5 and which management platform supports it

AP305C 10.3.r5 and which management platform supports it

RobertD1
Contributor
Hello,

Customer has bought new AP305C which came with 10.3.r5 which does not work with IQE 21.1.20.27 so presume the customer should upgrade to latest IQE to support both the hardware and software as it is new. There are no release notes on the portal for 10.3.r5 so how can they be sure upgrading will support these new APs? Does anyone have the release notes to share and/or is the latest release going to recognise them?

Thanks,
Rob
4 REPLIES 4

JamesR
New Contributor
Cannot perform software downgrade on APs to older releases than IQE v10.3r5
Article Type: Solution Article Number: 000102927 Last Modified: 3/3/2022
Symptoms
RapidFS
Software downgrade on APs cannot be performed to lower release versions than IQE v10.3r5. In the log file the following error message is seen.

The CLI 'save image <XXXX>' execute failed, cause by: Can not upgrade to this version, according to version setting.

RobertZ
Extreme Employee
I don't see that version being available also
148e1d24f53e48cf9a1ba561d3608e5b.png

SamPirok
Community Manager Community Manager
Community Manager
Hi Robert, could you double check the firmware version? I'm not finding anything for a 10.3r5 version.
GTM-P2G8KFN