B@AP, 802.1x encryption, Radius per Sites and controller loss ?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-06-2017 11:26 AM
What's the AP behavior with a VNS B@AP, 802.1x encryption and 2 Radius per SItes mode when the controller loss ?
Will it contÃnuos to accept and authenticate new 802.1x Users ?
Will it contÃnuos to accept and authenticate new 802.1x Users ?
10 REPLIES 10
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-08-2017 10:01 AM
Hi Valter,
Is this referencing a case you have open with GTAC (01292083)?
- Sam
Is this referencing a case you have open with GTAC (01292083)?
- Sam
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-08-2017 06:36 AM
Hi Valter,
If you remove one of the Radius servers does it work?
- Sam
If you remove one of the Radius servers does it work?
- Sam
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-07-2017 03:18 PM
OK, it should work, I will investigate why it isn't working, no request received at NPS.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-06-2017 12:56 PM
Have you read the user manual...
http://documentation.extremenetworks.com/wireless/v10_31/ug_new/wireless/user_guide/t_configuring_si...
http://documentation.extremenetworks.com/wireless/v10_31/ug_new/wireless/user_guide/t_configuring_si...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎05-06-2017 12:05 PM
But isn't working,
I'm using V2210 firmware 10.31.01.0048 and AP3805.
With the controller UP, the APs were requesting authetication to the NPS of the site. With the controller DOWN we don't have requests. The users that were connected maintain the connection.
the document in the Gtac is not clear about sites.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Maintain-Wireless-Services-upon-an-...
I'm using V2210 firmware 10.31.01.0048 and AP3805.
With the controller UP, the APs were requesting authetication to the NPS of the site. With the controller DOWN we don't have requests. The users that were connected maintain the connection.
the document in the Gtac is not clear about sites.
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-Maintain-Wireless-Services-upon-an-...
