Mac-Authenticantion on Identify Wireless

[Edson_Moura]

Hello guys,

How to enable mac-authentication on Identify Wireless?
How do I change the password to mac-auth? Is there a default password?

Thanks again,

Edson Moura

[Edson_Moura]

Hello Ronald,

I'm using NPS.

Is there some way to change the password on controller? Example: In the switches SecureStack it's possible to change the password to mac-auth by Policy Manager?

I'm trying to authenticate a printer.

Thanks,

Edson

[Jason1]

Edson,

In your VNS > WLAN services screen under "Auth & Acct" you just need to highlight the radius server and select "Configure". Then in the Radius Parameters window, highlight "MAC" in the top portion, and it will provide a window to set the password in.

Thanks,
Jason

[Ronald_Dvorak]

Thanks, so I'd authenticate all MACs on this WLAN service with the same password.... good to know.

[Jason1]

Ron,
I see what you mean. I have taken a look at the manual and that section (on page 6-24) is incorrect. That password setting is for sending a password to radius for mac authentication.

I will work with our tech writers to correct that.

Thanks,
Jason