RADIUS

[roxanne]

Hi guys,

its my first attempt of creating RADIUS which is already installed on a windows server R2 standard edition.
I then configure this on a cisco switch, but no luck as to how its supposed to work and authenticate any ideas

[Ronald_Dvorak]

I think the main issue is that you use a switch from Cisco instead of Extreme Networks.

[roxanne]

haha yeah good one. but then again cisco it is

[Brian_Holmes]

you then need to setup your policy, dictionary, authenticator and shared secret definitions on NPS.

[roxanne]

Thank you  I will test

[Brian_Holmes]

Next make sure the shared secret is setup between NPS and the switch. You should then try to ssh/telnet into the switch. Then check the NPS Appplication log to determine if the request if making it to NPS and what NPS is doing with it.