cancel
Showing results for 
Search instead for 
Did you mean: 

RADIUS

RADIUS

roxanne
New Contributor
Hi guys,

its my first attempt of creating RADIUS which is already installed on a windows server R2 standard edition.
I then configure this on a cisco switch, but no luck as to how its supposed to work and authenticate any ideas
11 REPLIES 11

Ronald_Dvorak
Honored Contributor
I think the main issue is that you use a switch from Cisco instead of Extreme Networks.

haha yeah good one. but then again cisco it is

Brian_Holmes
New Contributor III
you then need to setup your policy, dictionary, authenticator and shared secret definitions on NPS.

Thank you  I will test

Next make sure the shared secret is setup between NPS and the switch. You should then try to ssh/telnet into the switch. Then check the NPS Appplication log to determine if the request if making it to NPS and what NPS is doing with it.
GTM-P2G8KFN