cancel
Showing results for 
Search instead for 
Did you mean: 

RADIUS

RADIUS

roxanne
New Contributor
Hi guys,

its my first attempt of creating RADIUS which is already installed on a windows server R2 standard edition.
I then configure this on a cisco switch, but no luck as to how its supposed to work and authenticate any ideas
11 REPLIES 11

Marcus_Florido
New Contributor
The event log will tell you exactly why its failing. That will point you in the right direction. Also, your infrastructure is somewhat vaguely described--What part of the system is using Enterasys/Extreme Networks? Or is this a random "how to get NPS to work with Cisco" thread?

You also didn't describe the authentication mechanism--MAC auth, LDAP, 802.1x, ect... If you go into more detail we can probably address your problem more specifically.

Matthew_Hum
Contributor
You can always go to your event viewer and see why NPS is failing.

roxanne
New Contributor
Great thank you 

Ronald_Dvorak
Honored Contributor
That should cover it all...

https://learningnetwork.cisco.com/thread/112895

The first link in the list looks promising - I haven't configured a C in a long time.
GTM-P2G8KFN