cancel
Showing results for 
Search instead for 
Did you mean: 

When Extreme Wireless V2110 Down in Bridge mode

When Extreme Wireless V2110 Down in Bridge mode

Shooter_Chiang
New Contributor II
Hi Everyone,

V2110 : V9.15
AP : AP3825i

VNS Setting : Bridge Mode

1. SSID1: PSK + WPA2
2. SSID2 : MAC Auth with NAC
3. SSID3 : External Portal with NAC

When AP setting : Restart service in the absence of controller -> enable
===================================================
Click to Enable or Disable (if using a bridged at AP VNS) to ensure
the AP continues providing service if the AP’s connection to the
controller is lost. If this option is enabled, it allows the AP to start a
bridged at AP VNS even in the absence of a controller.
===================================================

When V2110(only one) Down,there is no Controller,but NAC is UP

SSID1 -> old session work fine
new session work fine

SSID2 -> old session work fine
new seesion can work ?

SSID3 -> old session not work
new seesion not work

How can I make SSID2 and SSID3 work fine with new session when V2110 down ?

Thanks

Regards,
Shooter
9 REPLIES 9

Doug
Extreme Employee
Scenario 3 is not supported in "Sites" mode....
Doug Hyde
Director, Technical Support / Extreme Networks

Doug
Extreme Employee
No problem Shooter, good luck!
Doug Hyde
Director, Technical Support / Extreme Networks

Shooter_Chiang
New Contributor II
Thanks for your information

Ronald_Dvorak
Honored Contributor
You'd use the feature "sites".
In short the AP act as the RADIUS client and send the request to the NAC.

But I think it's much easier to just run a second V2110 controller on another VM as standby.
And it's not that expensive also as you don't need to buy more AP licenses.

So I'd just get another VM controller for this "problem".
GTM-P2G8KFN