cancel
Showing results for 
Search instead for 
Did you mean: 

4 channel plan on 2.4 Ghz.

4 channel plan on 2.4 Ghz.

Rey_Juan_Carlos
Contributor
4 channels plan on 2.4Ghz doesn't work on APs 3825i+3805i with Controllers C5210.
We would like to try a 4 channels plan on 2.4 Ghz. We can put this configuration on the APs but you can not see it on the APs. Only 3 channels (1-7-13) in use.
Something wrong in my configuration??

Thanks in advance.
6 REPLIES 6

Umut_Aydin
Extreme Employee
Could you please check if you have Dynamic Channel Selection enabled under the advanced button?

Ronald_Dvorak
Honored Contributor
You've to set/apply channel auto again for the channel plan to take affect.
I don't think that ACS will re-run if you reboot the AP.

Thanks Ronald, that was the problem.
We had to select the radio in auto again.

Thanks a lot.
GTM-P2G8KFN