Aps is Showing Full duplex but it is taking 100mbps

[Aman]

We have upgraded the WLC from V9 to V10 and we have updated the License also.

One issue came after that..2 Aps( each Controller) are running on Full Duplex but its taking 100 mbps only , how to make it 1000 mbps.



please help

[Umut_Aydin]

You can try to change the port advertisement for the negotiation on the Switch , so that it has only the option 1000Base ?

PoE maybe an issue?

[Ronald_Dvorak]

Are the AP and the switch port set to auto negotiate.

It could also be that the CAT cabling / patch cable isn't good so you'd either messure it or try another CAT cable and patch link.

[Martineau__John]

Please restore AP to factory default
https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-reset-an-IdentiFi-access-point-back...
and pleqase note:
https://gtacknowledge.extremenetworks.com/articles/Solution/Factory-resetting-an-access-point-from-C...

[Aman]

I have rested the APs but its same.

[Aman]

HI Ronald,

I have try to resolve the issue from switch end, i also changed to gb port( which port is configured for Gb).it's not reflecting.