how to configure default route in controller C25
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-28-2015 10:50 PM
3 REPLIES 3
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎01-04-2016 11:54 AM
Reference: https://gtacknowledge.extremenetworks.com/articles/How_To/How-to-configure-the-default-route-on-the-...
Doug Hyde
Director, Technical Support / Extreme Networks
Director, Technical Support / Extreme Networks
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-29-2015 11:09 AM
Differrent way to do it for admin topology and differrent for physical topology. ip Route add 0.0.0.0 0.0.0.0 1.1.1.1 Apply The above should be for physical. The admin should be through; Topology Admin L3 ... Apply End Apply End ...
Regards
Zdeněk Pala
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-28-2015 11:04 PM
From the controller GUI > Controller > Network > Routing Protocols > new
For a default route set "Destination Address" and "Subnet Mask" to 0.0.0.0 and put 172.129.20.1 in the "Gateway" field.
-Ron
For a default route set "Destination Address" and "Subnet Mask" to 0.0.0.0 and put 172.129.20.1 in the "Gateway" field.
-Ron