ExtremeWireless (Identifi)
Questions and discussions about Identifi devices
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

APS showing as inactive

We have a bunch of 3935i APs that are showing up as inactive but all have IP addresses. They have all been updated to the latest 10.51.04.0009 firmware which is the same as our controller. We first encountered this issue when we first installed becau...

jdemo by New Contributor
  • 1941 Views
  • 4 replies
  • 0 kudos

How to prioritize WLAN\SSID from one AP

Hello, all! There 2 SSID's on 1 AP (3805). Both of them - open. But SSID1 with hotspot function based on Mikrotik - to connect, you have to watch a video ad (commercial). SSID2 - without. Main issue - after device sleep or after every Wi-Fi enablin...

Alexandr_P by Valued Contributor
  • 1079 Views
  • 3 replies
  • 0 kudos

Resolved! Mixing EWC Firmware

Hello, We are currently running 10.21.X on our C5210 controllers and are planning to upgrade them this month. We mostly have 3935i AP's; however, we still have a good amount of 3710i AP's which appear to only be supported up to the 10.41.12.0006 fi...

Extreme 3935i negotiating to 100MB

we have a handful of our 250 new Extreme Wireless 3935i access points that are negotiating to 100MB instead of Gigabit. On our controller we are seeing these under APS with low link speed. i checked the Avaya switches they are plugged into and the po...

jdemo by New Contributor
  • 1023 Views
  • 1 replies
  • 0 kudos
GTM-P2G8KFN