I have an WS-AP3805i with flashing green leds

[Jeff_Wilcenski]

I have an WS-AP3805i that had been working but now the radio leds and power led are alternating flashing green. So the radio leds flash green and then the power led flashes green.

[Jeff_Wilcenski]

I reset the port on the switch and it's working now, thank you for the help, I'll have to watch this one and see if it keeps working

[Doug]

...then if you can ping it, can you SSH to it?

[Ronald_Dvorak]

Check the GUI > Reports > APs > Active APs.
Is the AP listed or not = active tunnel to the controller.

If not - does the AP get an IP, could you ping it, could you ping it from the controller interface that is enabled for AP registration.

[Jeff_Wilcenski]

No it's not working. In the controller console it's showing up as inactive. I'm now noticing that the power led is flashing orange if that makes a difference?