I have two controllers WC-35 with version 10.31.01.0048, and C4110 with version 09.21.10.0005, and i would like configure mobility tunnel between tow controllers, the controller´s dont have HA, this is possible?
No, they don't need to be on the same VLAN/subnet.
Is a route configured on the controller so they could reach each other - you could try a ping from controller#1 to controller#2 to see whether routing works.
i tryed and the tunnel does not up, i have differents segment of network on interface of register 10.10.1.0/24 and 10.10.3.0/24. is necesary that the inferfaces have the same network segment?
