Show used topology in EWC client report?

[htw]

Hi,
how can I see at EWC Client Report which topology (group) /VLAN a wireless client uses?

I currently use EWC 10.21.01.0065 and client report shows only EWCs role for this client. In our installation the used VLAN is decided by NACs policy mapping table with policy roles and VLAN IDs.

[Umut_Aydin]

Hi,

sorry for the confusion..they removed PVID it in the 10.21.

I made a quick search in my lab and they was on 10.11 and 9.21.
And here you can always see the PVID but in the 10.21 not.

I will check if this is volitional in that version ?!

But in any case you don't have the VLAN info directly.

If so you have like you said only the Role and with that the binding to the Topology = VLAN.

Regards

Umut Aydin

[htw]

Hi,
i dont see a PVID in client report (please see attached picture). Is there an option which I have to set up?

[Umut_Aydin]

Hi,

you can only see the PVID .
That's the topolgy that the user had and this is tied to the certain VLAN.

There is no VLAN # data available only this binding.

Regards
Umut Aydin