Extreme Networks

htw · 04-03-2024

Hi,i want to automate a certain provisioning process with Workflow feature. The process requires to set several different CLI commands on some of our devices.For example:on device 1: CLI commands A and on device 2: CLI commands BThe devices which I ...

htw · 06-25-2020

Hi, XMC 8.4.3: in our device groups for core server switches one of the switches has poll status “ZTP+ staged” and poll details “Configuration staged for device.” Additionally as firmware version an older version is shown. If I do a “rediscover” fo...

htw · 06-28-2019

Hi, we want to deploy a 802.1x wifi and a guest network on APs which are controlled by an ECA HA pair. Two NACs will handle 802.1x authentication for 802.1x wifi. In "NAC Manager" we have an appliance group with those two NACs and in "switches" tab b...

htw · 10-11-2018

Hi, following scenario: - two AccessSwitchstacks X450-G2 (22.4), each connected with an MLAG to a pair of Summit X620 Distributionswitches. (X450 <=> X620 <=> X450) - VLAN A is configured in all Switches - VLAN B is configured in X620 and dynamically...

htw · 10-01-2018

Hi, with EOS I can use "show port advertise" to see the advertised speed of a network device which is connected to the switch, f.e.: SWITCHNAME(su)->show port advertise ge.1.5 ge.1.5 capability advertised remote ---------------------------...

htw · 04-03-2024

After looking for some phyton variable basics and some example workflows from github i tried adding the workflow variable in main:def main():mycustomport = emc_vars["mycustomport"]and then using it with cmds.append f.e.:elif emc_vars['deviceIP'] == "...

htw · 04-03-2024

Hi Markus,using your code as Phyton script activity I managed to send two different commands to two different devices of a three device test group. How can I implement variables into the commands? ( I am not very familiar with phyton.)In my test CLI...

htw · 07-07-2020

Update: deleting and readding switch solved the problem.

htw · 06-30-2020

Hi, i’m quite sure that there is no second switch with this IP. The ARP entry (in this subnets router) is 389 days old, which is the time when we installed the switch. I compared switch MAC address and serial number in XMC when I do rediscover and ...

htw · 06-29-2020

Hi Zdenek, thanks for your reply. I checked Poll Type Setting and it was already set to “SNMP”. Just to be sure I changed it to none, saved and set it back to SNMP, but the behaviour is still the same.

Extreme Networks

User Statistics

User Activity

Workflows CLI Activity: how to assign device per activity?

How to disable ZTP+ for a device?

Dedicated Guest NAC (IA-V) for GIM/guest: Add switch to more than two NAC Engines

Multicast problem with dynamically created vlans

EXOS equivalent for EOS "show port advertise"?

Re: Workflows CLI Activity: how to assign device per activity?

Re: Workflows CLI Activity: how to assign device per activity?

Re: How to disable ZTP+ for a device?

Re: How to disable ZTP+ for a device?

Re: How to disable ZTP+ for a device?