ExtremeWireless (IQE)
Questions and discussions about IQE devices (formerly known as Aerohive devices)
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

XR600P power options

I have an XR600P that is missing it's original power supply, and cannot find a replacement part anywhere on the web.I have found by experimentation that the XR600P can be powered up if its Eth4 is connected to a Fastpath SR2208 switch (the port then ...

Problems with the CLI Config

admin root-admin TRON password xxxxxxxxno capwap client enablesecurity-object Wifi1security-object Wifi1 security protocol-suite wpa2-aes-psk ascii-key xxxxxxxsecurity-object Wifi1 default-user-profile-attr 30security-object Wifi2security-object Wifi...

Joebacca by New Contributor
  • 0 replies
  • 0 kudos

Command Line Copy Config from one AP to Another

We have a batch of AP370's which was previously configured using HiveManager Online however as we are looking to replace our wireless network in a few months time we didn't renew the licensing for this. We have since had an AP stop responding and was...

RichardW by New Contributor
  • 1 replies
  • 0 kudos

No WLAN Connection possible with Konica Minolta MFP

Hello,one of our customers established a company wide wlan system with Aerohive devices.  Whenever we try to connect Konica Minolta MFPs (using internal wifi optional kit) we get no connection. Status of the wifi card stays at "not connected". WPA2-P...

OliverR by New Contributor
  • 0 replies
  • 0 kudos

Resolved! Flash LEDs on AP 650s

Hi All,As the subject line suggests I have a few APs that didn't get named in one of our sites. I can narrow down the IDF it's coming out and the port. There used to e a way to flash the LEDs on an AP. Does anyone remember how to do this? This would ...

DanielD by New Contributor
  • 3 replies
  • 1 kudos