Disable Bonjour Self-Registered Service

[SamD]

I have one AP230 in my environment that for some reason is advertising "Configure AP". I haven't been able to figure out what is different about this AP compared to all the others. Does anyone know how to disable this service advertisement?

I do not have Bonjour Gateway enable on any APs.

I have disable the web UI (no webui enable).

#show bonjour-gateway service local
Show Local Bonjour Gateway Service:
No.  VLAN Service-IP                              Port  Type                             Name
=========================================================================================================

Total 0 services.


Show Self-Registered Service:
No.  VLAN Service-IP       Port  Type                             Name
====================================================================================
1    0    192.168.0.6                               80    _http._tcp.                      Configure AP e8b231
          ::
          ::

Total 1 services.

[SamD]

I'm still having this issue even after resetting the device to factory defaults, even before applying my config.

[SamD]

One interesting thing I've noticed is that when the AP is restored to factory settings and rebooted, it advertises that service on reboot.

I'm not sure why the ah_bgd service is running and seems intent on creating this service advertisement.

2024-01-18 16:33:39 info    ah_bgd: application: bgd create ifp mgt0(<redacted>): ipv4 <redacited>  ipv6 ::/0 <redacted>/64 vlan <redacted>
2024-01-18 16:30:57 info    ah_bgd: application: service type flush timer fired, start to browse service types
2024-01-18 16:29:29 info    ah_bgd: application: BGD send VLAN change signal to mdnsd
2024-01-18 16:29:29 info    ah_bgd: application: BGD VLAN add Event (vid=<redacted>, ifindex=0x807d subnet=<redacted>, priority=1).
2024-01-18 16:29:29 info    ah_bgd: application: bgd create ifp mgt0(<redacted>): ipv4 <redacted>  ipv6 ::/0 <redacted>/64 vlan <redacted>
2024-01-18 16:29:29 info    ah_bgd: application: BGD receive mgt0 IP change event: 11 <redacted>

[Christoph_S]

Hello @SamD,

If it's one AP out of many, you may want to try the following:

1 - Revert device to template defaults: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000095853

2 - Reset it back to factory defaults and have it pull the configs again: https://extreme-networks.my.site.com/ExtrArticleDetail?an=000069780

BR,

[SamD]

I reset the config to default using the CLI and reloaded the config, but it is still advertising "Configure AP XXXXXX". I do not have this AP connected to Extreme Cloud IQ so I don't have a way to reset the device template. Any other ideas?