Yes, but I cannot tell you exactly how it should be formatted since I don’t know the deployment topology you are using.
The command though would look something like this:
login as: admin
admin@10.1.1.5's password:
MS-SRV-ACTIVE>en
MS-SRV-ACTIVE#conf t
Enter configuration commands, one per line. End with CNTL/Z.
MS-SRV-ACTIVE(config)#profile ap310 default-310
MS-SRV-ACTIVE(config)#controller host <nx5500_address> level 2 (or level 3)
MS-SRV-ACTIVE(config-profile-default-310)#commit write
