AP 7522 NOT Boradcasting SSID but AP6532 is.

[Julio_Oliveira]

Hi all,

I have one AP 7522 and one AP 6532 both using the same version (5.8.4) and I have a RFS6000 with the same version as well.

Both APs are in the same network and both are being adopted by Auto Provisioning Policy on the controller.

I can manage both aps and I can see both on the mint protocol as well.

I am not using the default profile I have created for both models and AP6532 is broadcasting the SSID normally but AP7532 is not.

As I said, same network, same RF Domain, the only difference is the model of access point.

Any idea?

Thanks

[ckelly]

Julio...as you can see in the output, the radios are both "off".
Usually the cause for this is that the country-code is not set. Double check the RF-Domain that the 7522 is placed and make sure that the RF-Domain has the county-code defined.

Or....on the AP, run this:
#show running-config rf-domain |in country-code

[Julio_Oliveira]

RADIO RADIO-MAC RF-MODE STATE CHANNEL POWER #CLIENT
---------------------------------------------------------------------------------------------
ap6532-815630:R1 84-24-8D-48-01-80 2.4GHz-wlan On 1 ( smt) 15 (smt) 0
ap6532-815630:R2 84-24-8D-48-00-A0 5GHz-wlan On 36w ( smt) 16 (smt) 1

ap7522-A882DC:R1 B8-50-01-F3-61-20 2.4GHz-wlan Off N/A ( smt) 30 (smt) 0
ap7522-A882DC:R2 B8-50-01-F4-39-30 5GHz-wlan Off N/A ( smt) 30 (smt) 0

[ckelly]

Julio...what is the output on the 7522 for:
#show wireless radio