cancel
Showing results for 
Search instead for 
Did you mean: 

AP 7522 NOT Boradcasting SSID but AP6532 is.

AP 7522 NOT Boradcasting SSID but AP6532 is.

Julio_Oliveira
New Contributor
Hi all,

I have one AP 7522 and one AP 6532 both using the same version (5.8.4) and I have a RFS6000 with the same version as well.

Both APs are in the same network and both are being adopted by Auto Provisioning Policy on the controller.

I can manage both aps and I can see both on the mint protocol as well.

I am not using the default profile I have created for both models and AP6532 is broadcasting the SSID normally but AP7532 is not.

As I said, same network, same RF Domain, the only difference is the model of access point.

Any idea?

Thanks

22 REPLIES 22

RobertZ
Extreme Employee
Can you provide the output of CLI command ' show adoption status |i ap7522-A882DC '

Ronald_Dvorak
Honored Contributor
Do you own a 2nd 7522 to see if you get the same result ?

Julio_Oliveira
New Contributor
RFS6000 is 5.8.4 as the AP6532.

Ondrej_Lepa
Extreme Employee
Upgrade to 5.9.x!

Regards,
Ondrej

Julio_Oliveira
New Contributor
As I said, they have exactly same configuration, same network, same everything, the ap is being adopted automatically by auto provisioning policy.

I just tried to configure as a new AP using a diferente RF Domain and I got the same error.

Radio: B8-50-01-A8-82-DC:R1, alias ap7522-A882DC:R1
STATE : Off [model-incompatible country-code]
PHY INFO : Bssid: B8-50-01-F3-61-20 RF-Mode: 2.4GHz-wlan
ACCESS POINT : Name: ap7522-A882DC Location: Dublin Placement: Indoor
CHANNEL : Current: N/A Configured: smt Width: 20MHz
TRANSMIT POWER : 0 dBm
ANTENNA USAGE : 2x2
MAXIMUM DATA RATES : Phy: N/A User: N/A
PHY SETTINGS : Short Preamble: N Dual Channel: N Spectrum Mgmt: N
RATE SELECTION : Standard
ANTENNA DOWNTILT : Not-Supported
RADIO SHARE MODE : Off
TRANSMIT BEAMFORMING : Enabled
MU-MIMO : Not-Supported
SCAN_AHEAD CHANNEL : -
ERP COEXISTENCE : ERP Protection: N Non-ERP detected: N Non-ERP associated: N
HT COEXISTENCE : HT Protection: no-protection, Non-HT detected: N
Current Channel Width: 20Mhz, reason: per configuration
Num of Mcast Streams : 0 (max:25)
Multicast streams :
# MP Mcast Streams : 0
WLAN MAP :
BSS-1 : UK WLAN 2* (*=primary)
Shutdown WLANs :
MESHPOINT map :
BSS MAP :
BSS-1 : basic-rates = 1 2 5.5 11
: supported-rates= 1 2 5.5 6 9 11 12 18 24 36 48 54 mcs-1s mcs-2s
Last error : ie [Ireland] not supported on hardware model AP-7522-67040-WR

and It was configured as UK before with the same error.
GTM-P2G8KFN