AP410 adoption by a VX9000 from another subnet is possible? If yes, how?
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-21-2021 02:04 AM
Hello,
I have VX9000 controller with ip 10.48.1.5 that is adopting all the APs from his subnet but not adopting the APs (AP410) from other subnet (10.56.10.XXX).
Do you know if VX9000 can adopt APs from other subnets ? If yes, how ?
Kind regards,
Andrew
I have VX9000 controller with ip 10.48.1.5 that is adopting all the APs from his subnet but not adopting the APs (AP410) from other subnet (10.56.10.XXX).
Do you know if VX9000 can adopt APs from other subnets ? If yes, how ?
Kind regards,
Andrew
7 REPLIES 7
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-23-2021 05:27 AM
The network issue was due to Gateway that was 0.0.0.0, I changed and after that everything was ok.
Thanks a lot for your help!
Merry Christmas !
Thanks a lot for your help!
Merry Christmas !
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-23-2021 05:02 AM
hi
is routing working?
> try to do a traceroute from ap to vx and vice versa
does the ap get the option192 (vx9k info) via dhcp additionally to its ip-settings?
does the vx has a default route/gateway configured?
nr
is routing working?
> try to do a traceroute from ap to vx and vice versa
does the ap get the option192 (vx9k info) via dhcp additionally to its ip-settings?
does the vx has a default route/gateway configured?
nr
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-22-2021 02:21 PM
Please get into privileged mode and ping:
>enable
#ping 10.56.10.52
and you can stop that annoying DOSATTACK/IPSPOOF message by following these instructions: https://extremeportal.force.com/ExtrArticleDetail?an=000080377
Cheers,​
>enable
#ping 10.56.10.52
and you can stop that annoying DOSATTACK/IPSPOOF message by following these instructions: https://extremeportal.force.com/ExtrArticleDetail?an=000080377
Cheers,​
Christoph S.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎12-22-2021 12:23 PM
Could be a missing/wrong next hop address/default gateway.
From the VX ping the default gateway in this subnet > what is the result
From the VX ping the default gateway in the AP subnet > what is the result
Then do the same from the AP.
-Ron
From the VX ping the default gateway in this subnet > what is the result
From the VX ping the default gateway in the AP subnet > what is the result
Then do the same from the AP.
-Ron
